Low Cost Hardwood Floor Repair
However, this process might require so much work than that. If the hardwood boards have been warped with water, then the boards that will be warped from the water have to be totally replaced. After which, the entire area should be sanded down and refinished in order for it to complement with the rest.
As already mentioned you can get rid of small dents and blemishes by refinishing them. Each refinishing job, however, strips away some of the wood. Refinish the wood too many times and you’ll notice soon enough that it’s become too thin to become of good use. Obviously, you can’t keep refinishing it forever. Most professionals say that the maximum number for refinishing a piece of hardwood floor is five times. When you reach that number it’s probably time to install a new hardwood floor.
A saw can then be used to cut into the flooring of the affected areas. The pry bar can then be used to pull the boards upward towards the boards that have been damaged. The boards will then be pulled from the floor. If you do not have any knowledge on lacing the boards back to the middle of the flooring, then it can be taken up all the way into a wall.
How To Repair Scratches, Gouges And Holes In Wood Floors
Deeper hardwood scratches are more difficult and require more experience and understanding of flooring repair concepts. Common methods include screening, resurfacing and replacing. If your flooring is riddled with light, shallow scratches, screening or abrading could be a solution, but only if your floors have never been waxed or contaminated with oily or acrylic residue. How can you tell if your floor has a waxed finish? Dampen a cloth with some paint thinner. Choose a small, discreet area of the floor and wipe the area with the cloth. If the floor has been coated with wax, the existing finish will wipe off.
Hardwood Floor Repair Service Near Me
And finally, refinishing isn’t always an option for flooring that is too thin (whether due to previous refinishing or a plank that is engineered not to be very thick, which may be the case with pre finished hardwood). If restoring your floors through refinishing isn’t an option, replacement may be your only recourse.
The last option, when all else fails, is replacement. Sometimes, wood becomes so damaged and warped that repair is simply not an option, and a partial or complete replacement becomes necessary. This often is the case with severely damaged engineered wood, wherein the thin layer of wood is too thin for resurfacing.
The new boards should then be left to acclimate with the new environment before the installation. This can help to ensure that it fits well together with that of the existing hardwood floors. The new boards will then be fitted inside an adjacent board by means of sliding the groove into the existing hardwood flooring. The new board will then be fitted to the adjacent hardwood by sliding its groove into the tongue of the other board. Some staples have to be fitted diagonally into the tongue of the board and the boards will then be installed continuously until such time that the entire area is filled.
Clearly, it pays to invite all potential hardwood floor repair contractors to your home and see the damage. As they look at the damaged hardwood, ask them the following questions to ensure you’re getting the best possible flooring contractor for your wood floor repair job. Do you guarantee your work? Is your sanding, dusty, dustless or DUST FREE? The dust created during the sanding is a very serious health hazard and should not be taken lightly. Some companies use dust bags to contain the dust on some of the machines and no dust containment on the other machines, this is the nightmare story that we have all heard about. Some companies claim to be dustless, dustless is just that, less dust and DUST FREE is truly DUST FREE.
When you have used the form to ask for quotes, it’s a good idea that you read through our description of the different types of finishes as some are also more expensive than others. Talk with us about your needs and desires and we will be able to provide you with the best recommendations.
We have the technical know-how to resolve water damage problems. Water damage is a very common problem.
It’s not uncommon that such a project takes an entire day to complete, and it will only take longer the bigger the space is where it needs to be done. First, you will have to get all the furniture and other things out of the room. A good contractor, however, will be process oriented in their approach.
Hardwood Floor Scratch Repair Companies
Replacing your hardwood floors is expensive. Fortunately, if they’re not too damaged, you can make them look like new again and spend a lot less by refinishing your hardwood. Furthermore, floor refinishing services usually don’t take longer than three to five days to complete we are here to refinish your hardwood floor.